Multimodal Container Ttransportation Ttraceability and Supply Chain Risk Management: A Review of Methods and Solutions

Document Type : GOL20


Department of Industrial engineering, IMT Mines Albi-Carmaux , Toulouse University, IMT Mines Albi, Albi, France


Containerization has revolutionized international freight transport. It makes possible to optimize port handling operations and offers multimodality. In addition, the construction of increasingly large container vessels allows economies of scale while smart logistics thanks to the development of the Internet of Things, increase companies’ flexibility and responsiveness. However, international multimodal transportation is subject to random events (risks) and suffers from lack of visibility which severely impacts the entire supply chain. In order to deal with these problems, research has been carried out in the field of supply chain risk management and the literature has been widely populated. This work deals with multimodal container supply chain risk management using traceability and visibility Data. The main objective of this paper is to analyze proposed solutions to improve the supply chains efficiency by acting on risk management in containers transportation, highlighting literature gaps and providing future research directions. Finally, a specific approach for real-time management of shipments by taking into account random events is proposed.


Agamez-Arias, A.-D.-M., and Moyano-Fuentes, J. (2017). Intermodal transport in freight distribution: A literature review. Transport Reviews, Vol. 37(6), pp. 782‑807.
Agbo, A. A., Li, W., Atombo, C., Lodewijks, G., and Zheng, L. (2017). Feasibility study for the introduction of synchromodal freight transportation concept. Cogent Engineering, Vol. 4(1), pp. 1305649.
Aghalari, A., Nur, F., and Marufuzzaman, M. (2020). A Bender’s based nested decomposition algorithm to solve a stochastic inland waterway port management problem considering perishable product. International Journal of Production Economics, Vol. 229, pp. 107863.
Alessandrini, A., Mazzarella, F., and Vespe, M. (2019). Estimated Time of Arrival Using Historical Vessel Tracking Data. IEEE Transactions on Intelligent Transportation Systems, Vol. 20(1), pp. 7‑15.
Allen, T. R., McLeod, G., and Hutt, S. (2021). Sea level rise exposure assessment of US East Coast cargo container terminals. Maritime Policy & Management, Vol. 0(0), pp. 1-23.
Alyami, H., Lee, P. T.-W., Yang, Z., Riahi, R., Bonsall, S., and Wang, J. (2014). An advanced risk analysis approach for container port safety evaluation. Maritime Policy & Management, Vol. 41(7), pp. 634‑650.
Amador, C., Emond, J.-P., and Nunes, M. C. N. (2009). Application of RFID technologies in the temperature mapping of the pineapple supply chain. Sensing and Instrumentation for Food Quality and Safety, Vol. 3(1), pp. 26‑33.
Andrews, D. J., Pennetti, C. A., Collier, Z. A., Polmateer, T. L., and Lambert, J. H. (2020). Segmented Identification of Disruptive Settings on Transportation Corridors. In G. Zhang (Éd.), International Conference on Transportation and Development 2020—Traffic and Bike/Pedestrian Operations, No. 2020, pp. 147‑158.
Bălan, C. (2020). The disruptive impact of future advanced ICTs on maritime transport: A systematic review. Supply Chain Management, Vol. 25(2), pp. 157‑175.
Baykasoğlu, A., Subulan, K., Taşan, A. S., and Dudaklı, N. (2019). A review of fleet planning problems in single and multimodal transportation systems. Transportmetrica A: Transport Science, Vol. 15(2), pp. 631‑697.
Bendriss, S., and Benabdelhafid, A. (2011). Multimodal transport information system: Modelling approach for goods traceability. International Journal of Business Information Systems, Vol. 7(4), pp. 365‑387.
Bentaleb, F., Mabrouki, C., and Semma, A. (2015). A Multi-Criteria Approach for Risk Assessment of Dry Port-Seaport System. Supply Chain Forum, Vol. 16(4), pp. 32‑49.
Beskovnik, B., and Golnar, M. (2020). Eliminating barriers for sustainable transport systems on maritime Silk Road and baltic-adriatic corridor under BRI. In SUSTAINABILITY, Vol. 12(8), pp. 7412.
Bhatti, O. K., and Hanjra, A. R. (2019). Development prioritization through analytical hierarchy process (AHP)—Decision making for port selection on the one belt one road. Journal of Chinese Economic and Foreign Trade Studies, Vol. 12(3), pp. 121‑150.
Bollen, A. F., Riden, C. P., and Opara, L. U. (2006). Traceability in postharvest quality management. International Journal of Postharvest Technology and Innovation, Vol. 1(1), pp. 93‑105.
Bukkapatnam, S. T. S., and Komanduri, R. (2007). Container integrity and condition monitoring using RF vibration sensor tags. Proceedings of the 3rd IEEE International Conference on Automation Science and Engineering, IEEE CASE 2007, No. 3, pp. 585‑590.
Cai, H., Hu, Z.-H., and Liu, W. (2009). Container process flow visualization by spatial location technologies. PACIIA 2009 - 2009 2nd Asia-Pacific Conference on Computational Intelligence and Industrial Applications, No. 2, pp. 131‑134.
Cao, X., and Lam, J. S. L. (2019). Simulation-based severe weather-induced container terminal economic loss estimation. Maritime Policy & Management, Vol. 46(1), pp. 92‑116.
Castelein, B., Geerlings, H., and Van Duin, R. (2020). The reefer container market and academic research : A review study. Journal of Cleaner Production, Vol. 256, pp. 120654.
Chang, K.-Y., Liu, C.-P., Huang, M.-L., Shen, J.-H., and Ding, J.-F. (2020). Implementation of Cargo Image System Via QR Code for Export Containers : Case Study of the Keelung Port. Marine Technology Society Journal, Vol. 54(1), pp. 97‑109.
Chargui, K., Zouadi, T., El Fallahi, A., Reghioui, M., and Aouam, T. (2020). A quay crane productivity predictive model for building accurate quay crane schedules. Supply Chain Forum, Vol. 22(2), pp. 136-156.
Chen, C.-Y., Ding, J.-F., Liang, G.-S., and Chou, T.-Y. (2018). Applying fuzzy grey quality function deployment to identify solutions for improving safety of container terminal loading and unloading operations. Proceedings of the Institution of Mechanical Engineers Part M-Journal of Engineering for the Maritime Environment, Vol. 232(3), pp. 276‑292.
Chen, D., Wang, X., Nelson, P., Li, Y., Zhao, N., Zhao, Y., Lang, J., Zhou, Y., and Guo, X. (2017). Ship emission inventory and its impact on the PM2.5 air pollution in Qingdao Port, North China. Atmospheric Environment, Vol. 166, pp. 351‑361.
Chen, T. C. (2005). RFID and sensor-based container content visibility and seaport security monitoring system. In E. M. Carapezza (Éd.), Sensors, and Command, Control, Communications, and Intelligence (C31)   Technologies for Homeland Security and Homeland Defense IV, Pts 1 and 2 Vol. 5778, p. 151‑159.
Cominelli, S., Halliday, W. D., Pine, M. K., Hilliard, R. C., Lawson, J. W., Duman, N., and Devillers, R. (2020). Vessel noise in spatially constricted areas : Modeling acoustic footprints of large vessels in the Cabot Strait, Eastern Canada. Ocean & Coastal Management, Vol. 194, pp. 105255.
Coppolino, L., D’Antonio, S., Formicola, V., Oliviero, F., and Romano, L. (2011). On the security of the terminal operations for container shipping in multimodal transport : The SIS-TEMA project. 6th International Conference on Risks and Security of Internet and Systems, No. 6, pp. 1-6.
Cullinane, K., Tseng, P.-H., and Wilmsmeier, G. (2016). Estimation of container ship emissions at berth in Taiwan. International Journal of Sustainable Transportation, Vol. 10(5), pp. 466‑474.
Do, N. A. D., Nielsen, I. E., Chen, G., and Nielsen, P. (2016). A simulation-based genetic algorithm approach for reducing emissions from import container pick-up operation at container terminal. Annals of Operations Research, Vol. 242(2), pp. 285‑301.
Dorri, A., Kanhere, S. S., and Jurdak, R. (2018). Multi-Agent Systems : A Survey. IEEE Access, Vol. 6, pp. 28573‑28593.
Dua, A., and Sinha, D. (2019). Quality of multimodal freight transportation: A systematic literature review. World Review of Intermodal Transportation Research, Vol. 8(2), pp. 167‑194.
Emenike, C. C., Eyk, N. P. V., and Hoffman, A. J. (2016). Improving Cold Chain Logistics through RFID temperature sensing and Predictive Modelling. 19th International Conference on Intelligent Transportation Systems (ITSC), No. 19, pp. 2331‑2338.
Expósito-Izquierdo, C., Melián-Batista, B., and Moreno-Vega, J. M. (2018). A review of soft computing techniques in maritime logistics and its related fields. Studies in Fuzziness and Soft Computing, Vol. 360, pp. 1‑23.
Fan, L., and Wilson, W. W. (2012). Impacts of congestion and stochastic variables on the network for US container imports. Journal of Transport Economics and Policy, Vol. 46(3), pp. 381‑398.
Fan, L., Wilson, W. W., and Dahl, B. (2012). Congestion, port expansion and spatial competition for US container imports. Transportation Research Part E: Logistics and Transportation Review, Vol. 48(6), pp. 1121‑1136.
Fan, Y., Behdani, B., and Bloemhof-Ruwaard, J. M. (2020). Reefer logistics and cool chain transport: A systematic review and multi-actor system analysis of an un-explored domain. European Journal of Transport and Infrastructure Research, Vol. 20(2), pp. 1‑35.
Filina-Dawidowicz, L., Możdrzeń, D., and Stankiewicz, S. (2020). Integrated Approach for Planning of Intermodal Food Transport Chains Considering Risk Factors. Communications in Computer and Information Science, Vol. 1307, pp. 319‑332.
Folinas, D., Aidonis, D., Mallidis, I., and Papadopoulou, M. (2015). Identification of Container Handling Procedures. In M. Vidovic, M. Kilibarda, S. Zecevic, M. Miljus, and G. Radivojevic (Éds.). Proceedings of the 2nd Logistics International Conference, pp. 99‑104.
Fotuhi, F., and Huynh, N. (2017). Reliable Intermodal Freight Network Expansion with Demand Uncertainties and Network Disruptions. Networks and Spatial Economics, Vol. 17(2), pp. 405‑433.
Fri, M., Douaioui, K., Mabrouki, C., and El Alami, S. (2021). Reducing Inconsistency in Performance Analysis for Container Terminals. International Journal of Supply and Operations Management, Vol. 8(3), pp. 328‑346.
Fruth, M., and Teuteberg, F. (2017). Digitization in maritime logistics—what is there and what is missing? Cogent Business & Management, Vol. 4(1), pp. 1411066.
Gallo, A., Accorsi, R., Baruffaldi, G., and Manzini, R. (2017). Designing sustainable cold chains for long-range food distribution : Energy-effective corridors on the Silk Road Belt. Sustainability (Switzerland), Vol. 9(11), pp. 2044.
Giusti, R., Iorfida, C., Li, Y., Manerba, D., Musso, S., Perboli, G., Tadei, R., and Yuan, S. (2019). Sustainable and de-stressed international supply-chains through the SYNCHRO-NET approach. Sustainability (Switzerland), Vol. 11(4), pp. 1083.
Gourc, D. (2006). Vers un modèle général du risque pour le pilotage et la conduite des activités de biens et de services : Propositions pour une conduite des projets et une gestion des risques intégrées. Institut national polytechnique de Toulouse.
Güller, M., Koc, E., Hegmanns, T., Henke, M., and Noche, B. (2015). A simulation-based decision support framework for real-time supply chain risk management. International Journal of Advanced Logistics, Vol. 4(1), pp. 17‑26.
Gunes, B., Kayisoglu, G., and Bolat, P. (2021). Cyber security risk assessment for seaports : A case study of a container port. Computers & Security, Vol. 103, pp. 102196.
Guo, Z. X., Ngai, E. W. T., Yang, C., and Liang, X. (2015). An RFID-based intelligent decision support system architecture for production monitoring and scheduling in a distributed manufacturing environment. International Journal of Production Economics, Vol.  159, pp. 16‑28.
Hansut, L., David, A., and Gasparik, J. (2017). The Critical Path Method as the Method for Evaluation and Identification of the Optimal Container Trade Route between Asia and Slovakia. In D. Dujak (Éd.), Business Logistics in Modern Management, Vol. 17, pp. 29‑42.
Harris, I., Wang, Y., and Wang, H. (2015). ICT in multimodal transport and technological trends : Unleashing potential for the future. International Journal of Production Economics, Vol. 159, pp. 88‑103.
He, J., Tan, C., Yan, W., Huang, W., Liu, M., and Yu, H. (2020). Two-stage stochastic programming model for generating container yard template under uncertainty and traffic congestion. Advanced Engineering Informatics, Vol. 43, pp. 101032.
He, J., Tan, C., and Zhang, Y. (2019). Yard crane scheduling problem in a container terminal considering risk caused by uncertainty. In ADVANCED ENGINEERING INFORMATICS, Vol. 39, pp. 14‑24.
Heilig, L., and Voß, S. (2017). Information systems in seaports : A categorization and overview. Information Technology and Management, Vol. 18(3), pp. 179‑201.
Heinold, A., and Meisel, F. (2020). Emission limits and emission allocation schemes in intermodal freight transportation. Transportation Research Part E: Logistics and Transportation Review, Vol. 141, pp. 101963.
Hervas-Peralta, M., Poveda-Reyes, S., Dolores Molero, G., Enrique Santarremigia, F., and Pastor-Ferrando, J.-P. (2019). Improving the Performance of Dry and Maritime Ports by Increasing Knowledge about the Most Relevant Functionalities of the Terminal Operating System (TOS). Sustainability, Vol. 11(6), pp. 1648.
Hilmola, O.-P., and Lättilä, L. (2013). Simulation modelling challenge of transportation logistics systems. International Journal of Business Information Systems, Vol. 14(4), pp. 429‑442.
Hossain, N. U. I., Nur, F., Hosseini, S., Jaradat, R., Marufuzzaman, M., and Puryear, S. M. (2019). A Bayesian network based approach for modeling and assessing resilience : A case study of a full service deep water port. Reliability Engineering and System Safety, Vol. 189, pp. 378‑396.
Hsu, W.-K. K., Huang, S.-H. S., and Wu, S.-W. (2021). A 3D continuous risk matrix for the assessment of operational safety in inland container terminals. Proceedings of the Institution of Mechanical Engineers Part M-Journal of Engineering for the Maritime Environment, pp. 147509022110514.
Hu, Z.-H., Yang, B., Huang, Y.-F., and Meng, Y.-P. (2010). Visualization framework for container supply chain by information acquisition and presentation technologies. Journal of Software, Vol. 5(11), pp. 1236‑1242.
ISO 31000, Risk management – Guidelines (2018). Edition. 1, Published in Switzerland.
Jiang, M., and Lu, J. (2020). The analysis of maritime piracy occurred in Southeast Asia by using Bayesian network. Transportation Research Part E: Logistics and Transportation Review, Vol. 139, pp. 101965.
Kontovas, C., and Psaraftis, H. N. (2011). Reduction of emissions along the maritime intermodal container chain : Operational models and policies. Maritime Policy & Management, Vol. 38(4), pp. 451‑469.
Lack, D. A., Cappa, C. D., Langridge, J., Bahreini, R., Buffaloe, G., Brock, C., Cerully, K., Coffman, D., Hayden, K., Holloway, J., Lerner, B., Massoli, P., Li, S.-M., McLaren, R., Middlebrook, A. M., Moore, R., Nenes, A., Nuaaman, I., Onasch, T. B., … Williams, E. (2011). Impact of Fuel Quality Regulation and Speed Reductions on Shipping Emissions : Implications for Climate and Air Quality. Environmental Science & Technology, Vol. 45(20), pp.  9052‑9060.
Lam, J. S. L., Liu, C., and Gou, X. (2017). Cyclone risk mapping for critical coastal infrastructure : Cases of East Asian seaports. Ocean & Coastal Management, Vol. 141, pp. 43‑54.
Lättilä, L., and Saranen, J. (2011). Multimodal transportation risk in gulf of Finland region. World Review of Intermodal Transportation Research, Vol. 3(4), pp. 376‑394.
Lee, H. L. (1993). Design for Supply Chain Management : Concepts and Examples. In R. K. Sarin (Éd.), Perspectives in Operations Management : Essays in Honor of Elwood S. Buffa, pp. 45‑65.
Li, W., Hilmola, O.-P., and Panova, Y. (2019). Container sea ports and dry ports : Future CO2 emission reduction potential in China. Sustainability (Switzerland), Vol. 11(6), pp. 1515.
Li, X., Kuang, H., and Hu, Y. (2020). Using System Dynamics and Game Model to Estimate Optimal Subsidy in Shore Power Technology. IEEE Access, Vol. 8, pp. 116310‑116320.
Lim, G. J., Cho, J., Bora, S., Biobaku, T., and Parsaei, H. (2018). Models and computational algorithms for maritime risk analysis : A review. Annals of Operations Research, Vol. 271(2), pp. 765‑786.
Liu, B., and Wang, Y. (2021). Simulation-based emission calculation method for container terminal production operation system. IOP Conference Series: Earth and Environmental Science, Vol. 638, pp. 012028.
Longo, F., Mirabelli, G., and Bruzzone, A. (2005). Container handling policy design by simulation framework. International Workshop on Harbour, Maritime and Multimodal Logistics Modeling and Simulation, HMS 2005, Held at the International Mediterranean Modeling Multiconference, I3M 2005,  pp. 69‑74.
Longo, F., and Ören, T. (2008). Supply chain vulnerability and resilience: A state of the art overview, 20th European Modeling and Simulation Symposium, EMSS 2008, No. 20, pp. 527‑533.
Longo, F., Mirabelli, G., and Tremori, A. (2009). Simulation, risks modeling and sensors technologies for container terminals security. 21st European Modeling and Simulation Symposium, EMSS 2009. Scopus, No. 21, pp. 1-7.
Ma, Q., Wang, W., Peng, Y., and Song, X. (2018). An optimization approach to the intermodal transportation network in fruit cold chain, considering cost, quality degradation and carbon dioxide footprint. Polish Maritime Research, Vol. 25(1), pp. 61‑69.
Mahmood, S., Hasan, R., Ullah, A., and Sarker, K. U. (2019). SMART security alert system for monitoring and controlling container transportation. 2019 4th MEC International Conference on Big Data and Smart City, ICBDSC 2019, No. 19, pp. 1-5.
Mar-Ortiz, J., Gracia, M. D., and Castillo-García, N. (2018). Challenges in the design of decision support systems for port and maritime supply chains. Studies in Computational Intelligence, Vol. 764, pp. 49‑71.
Marquès, G. (2010). Management des risques pour l’aide à la gestion de la collaboration au sein d’une chaîne logistique : Une approche par simulation [Phd]. Institut National Polytechnique de Toulouse (INP Toulouse).
Matsukura, H., Udommahuntisuk, M., Yamato, H., and Dinariyana, A. A. B. (2010). Estimation of CO2 reduction for Japanese domestic container transportation based on mathematical models. Journal of Marine Science and Technology, Vol. 15(1), pp. 34‑43.
Meijer, R. (2017). ETA prediction: Predicting the ETA of a container vessel based on route identification using AIS data.
Mennis, E., Platis, A., Lagoudis, I., and Nikitakos, N. (2008). Improving port container terminal efficiency with the use of Markov theory. Maritime Economics and Logistics, Vol. 10(3), pp. 243‑257.
Miller-Hooks, E., Chen, L., Nair, R., and Mahmassani, H. S. (2009). Security and mobility of intermodal freight networks. Transportation Research Record, Vol. 2137, pp. 109‑117.
Mueller, R. (2008). Developing a Security Event Management System for intermodal transport. Dynamics in Logistics, pp. 405‑412.
Munuzuri, J., Onieva, L., Cortes, P., and Guadix, J. (2020). Using IoT data and applications to improve port-based intermodal supply chains. Computers & Industrial Engineering, Vol. 139, pp. 105668.
Muñuzuri, J., Onieva, L., Escudero Santana, A., and Cortés, P. (2016). Impacts of a Tracking and Tracing System for Containers in a Port-Based Supply Chain. Brazilian Journal of Operations & Production Management, Vol. 13(3), pp. 352–359.
Nguyen, S. (2020). A risk assessment model with systematical uncertainty treatment for container shipping operations. Maritime Policy & Management, Vol. 47(6), pp. 778‑796.
Nguyen, S., and Wang, H. (2018). Prioritizing operational risks in container shipping systems by using cognitive assessment technique. Maritime Business Review, Vol. 3(2), pp. 185‑206.
Onut, S., Tuzkaya, U. R., and Torun, E. (2011). Selecting container port via a fuzzy ANP-based approach : A case study in the Marmara Region, Turkey. Transport Policy, Vol. 18(1), pp. 182‑193.
Ouedraogo, C. A., ROSEMONT, C., Namakiaraghi, S., Montarnal, A., and Gourc, D. (2020). Maritime risks taxonomy: A structured literature review of maritime risks classification. MOSIM’20 - 13ème Conférence internationale de Modélisation, Optimisation et Simulation, No. 13, pp 1-17.
Ouedraogo, C. A., Namakiaraghi, S., Rosemont, C., Montarnal, A., Lauras, M., and Gourc, D. (2020). Traceability and risk management in multi-modal container transport: A small—Scale review of methods and technologies. Proceedings - 2020 5th International conference on logistics operations management (GOL), No. 5, pp. 296‑302.
Pallotta, G., Vespe, M., and Bryan, K. (2013). Vessel Pattern Knowledge Discovery from AIS Data: A Framework for Anomaly Detection and Route Prediction. Entropy, Vol. 15(6), pp. 2218‑2245.
Pant, R., Barker, K., Grant, F. H., and Landers, T. L. (2011). Interdependent impacts of inoperability at multi-modal transportation container terminals. Transportation Research Part E: Logistics and Transportation Review, Vol. 47(5), pp. 722‑737.
Papert, M., Rimpler, P., and Pflaum, A. (2016). Enhancing supply chain visibility in a pharmaceutical supply chain Solutions based on automatic identification technology. International Journal of Physical Distribution & Logistics Management, Vol. 46(9), pp. 859‑884.
 Park, Y. I., Lu, W., Nam, T. H., and Yeo, G. T. (2019). Terminal Vitalization Strategy through Optimal Route Selection Adopting CFPR Methodology. Asian Journal of Shipping and Logistics, Vol. 35(1), pp. 41‑48.
Parolas, I. (2016). ETA prediction for containerships at the Port of Rotterdam using Machine Learning Techniques. Delft University of technology.
Pinakpani, P., Polisetty, A., N Rao, G. B., Harrison Sunil, D., Kumar, B. M., Deepthi, D., and Sidhireddy, A. (2020). An algorithmic approach for maritime transportation. International Journal of Advanced Computer Science and Applications, Vol. 2, pp. 764‑775.
Potgieter, L., Goedhals-Gerber, L. L., and Havenga, J. (2020). Risk Profile of Weather and System-Related Port Congestion for the Cape Town Container Terminal. Southern African Business Review, Vol. 24, pp. 6149.
Qiao, W., Haghani, A., and Hamedi, M. (2013). A Nonparametric Model for Short-Term Travel Time Prediction Using Bluetooth Data. Journal of Intelligent Transportation Systems, Vol. 17(2), pp. 165‑175.
Sahin, B., and Soylu, A. (2020). Multi-Layer, Multi-Segment Iterative Optimization for Maritime Supply Chain Operations in a Dynamic Fuzzy Environment. IEEE Access, Vol. 8, pp. 144993‑145005.
Sahnoun, A., and Maamri, R. (2015). Petri Net Modeling Dynamic Context of Container For Risk Management A Case Study of Le Havre Seaport. 2015 Ieee/Acs 12th International Conference of Computer Systems and Applications (Aiccsa), No. 12, pp. 1-8.
Šakalys, R., Sivilevičius, H., Miliauskaitė, L., and Šakalys, A. (2019). Investigation and evaluation of main indicators impacting synchromodality using ARTIW and AHP methods. Transport, Vol. 34(3), pp. 300‑311.
Schoen, Q., Pinon-Baca, D., Lauras, M., Fontanili, F., and Truptil, S. (2018). A new transport management system design considering the upcoming logistics environment and the sensitive products supply chains. ILS 2018 - 7th International Conference on Information Systems, Logistics and Supply Chain, No 7, pp. 286‑295.
Shen, L., Zhu, G., Qian, X., Zhang, L., Wang, Y., and Shi, X. (2019). Risk Analysis of Cold Logistics Chains in Maritime Transportation. 5th International Conference on Transportation Information and Safety, No. 5, pp. 1152‑1162.
Shibasaki, R., Azuma, T., Yoshida, T., Teranishi, H., and Abe, M. (2017). Global route choice and its modelling of dry bulk carriers based on vessel movement database: Focusing on the Suez Canal. Research in Transportation Business and Management, Vol. 25, pp. 51‑65.
Slaczka, W., Pietrusewicz, K., and Marcinek, M. (2017). Intelligent Container in Water—Land Transport. MBSE Approach for System Design. In J. Mikulski (Éd.), Smart Solutions in Today’s Transport, Vol. 715, pp. 344‑359.
Swieboda, J. (2016). System resilience at an intermodal transshipment node. In CLC 2015: Carpathian logistics congress -conference proceeding, pp. 502‑511.
Tadic, S., Krstic, M., Roso, V., and Brnjac, N. (2020). Dry port terminal location selection by applying the hybrid grey MCDM model. Sustainability (Switzerland), Vol. 12(17), pp. 6983.
Tao, X., and Wu, Q. (2021). Energy consumption and CO2 emissions in hinterland container transport. Journal of Cleaner Production, Vol. 279, pp. 123394.
Tran, T. H., Dobrovnik, M., and Kummer, S. (2018). Supply chain risk assessment: A content analysis-based literature review. International Journal of Logistics Systems and Management, Vol. 31(4), pp. 562‑591.
Tsao, Y.-C., and Linh, V. T. (2018). Seaport- dry port network design considering multimodal transport and carbon emissions. Journal of Cleaner Production, Vol. 199, pp. 481‑492.
Tseng, W.-J., Ding, J.-F., Hung, S.-H., and Poma, W. (2019). Risk Management of Terminal on-Site Operations for Special Bulk Cargos in Taiwan. International Journal of Maritime Engineering, Vol. 161, pp. 117‑128.
Tu, E., Zhang, G., Mao, S., Rachmawati, L., and Huang, G.-B. (2020). Modeling Historical AIS Data For Vessel Path Prediction: A Comprehensive Treatment. ArXiv, abs/2001.01592.
UNECE, United Nations, 2020. (2020). Trade facilitation white paper on smart containers; Real-time smart container data for supply chain excellence.
Urciuoli, L. (2018). An algorithm for improved ETAs estimations and potential impacts on supply chain decision making. Procedia Manufacturing, Vol. 25, pp. 185‑193.
Vallejo-Pinto, J. A., Garcia-Alonso, L., Álvarez Fernández, R., and Mateo-Mantecón, I. (2019). Iso-emission map : A proposal to compare the environmental friendliness of short sea shipping vs road transport. Transportation Research Part D: Transport and Environment, Vol. 67, pp. 596‑609.
Vilko, J. P. P., and Hallikas, J. M. (2012). Risk assessment in multimodal supply chains. International Journal of Production Economics, Vol. 140(2), pp. 586‑595.
Vilko, J., Ritala, P., and Hallikas, J. (2019). Risk management abilities in multimodal maritime supply chains: Visibility and control perspectives. Accident Analysis & Prevention, Vol. 123, pp. 469‑481.
Wattanakul, S., Henry, S., Bentaha, M. L., Reeveerakul, N., and Ouzrout, Y. (2018). Improvement of the Containerize Performance based on the Unitary Traceability of Smart Logistics Units. 15th IFIP International Conference on Product Lifecycle Management (PLM 2018), No. 15, pp. 410-419.
Wattanakul, S., Reeveerakul, N., Henry, S., and Ouzrout, Y. (2019). Uncertainty handling in containerized logistics: Unitary Traceability Object approach. International Conference on Software, Knowledge, Information Management and Applications (SKIMA), No. 13, pp.  1‑7.
Wide, P. (2020). Real-time information for operational disruption management in hinterland road transport. World Review of Intermodal Transportation Research, Vol. 9(4), pp. 358‑375.
Wong, E. Y. C., Tai, A. H., Lau, H. Y. K., and Raman, M. (2015). An utility-based decision support sustainability model in slow steaming maritime operations. Transportation Research Part E-Logistics and Transportation Review, Vol. 78, pp. 57‑69.
Yan, W., He, J., and Trappey, A. J. C. (2019). Risk-aware supply chain intelligence: AI-enabled supply chain and logistics management considering risk mitigation. Advanced Engineering Informatics, Vol. 42, pp. 100976.
Yang, Y.-L., Ding, J.-F., Chiu, C.-C., Shyu, W.-H., Tseng, W.-J., and Chou, M.-T. (2016). Core risk factors influencing safe handling operations for container terminals at Kaohsiung port. Proceedings of the Institution of Mechanical Engineers Part M-Journal of Engineering for the Maritime Environment, Vol. 230(2), pp. 444‑453.
Zhang, C., Bin, J., Wang, W., Peng, X., Wang, R., Halldearn, R., and Liu, Z. (2020). AIS data driven general vessel destination prediction: A random forest based approach. Transportation Research Part C: Emerging Technologies, Vol. 118, pp. 102729.
Zhang, Z., Zhang, D., Tavasszy, L. A., and Li, Q. (2020). Multicriteria intermodal freight network optimal problem with heterogeneous preferences under belt and road initiative. Sustainability (Switzerland), Vol. 12(24), pp. 1‑24.
Zhao, Y., Zhou, J., Fan, Y., and Kuang, H. (2020). An Expected Utility-Based Optimization of Slow Steaming in Sulphur Emission Control Areas by Applying Big Data Analytics. Ieee Access, Vol. 8, pp. 3646‑3655.
Zou, X., Tao, F., Jiang, P., Gu, S., Qiao, K., Zuo, Y., and Xu, L. (2016). A new approach for data processing in supply chain network based on FPGA. The International Journal of Advanced Manufacturing Technology, Vol. 84(1), pp. 249‑260.