Improving Maintenance Strategy by Physical Asset Management in Petrochemical: Applying Developments in Air Craft Maintenance Considering the use of MFOP instead of MTBF

Document Type : Research Paper

Authors

Department of Industrial Engineering, Faculty of Engineering, Kharazmi University, Tehran, Iran

Abstract

The aim of this study is to compare the aviation derived reliability metric known as the Maintenance Free Operating Period (MFOP), with the traditionally used, and commonly found, reliability metric Mean Time Between Failure (MTBF), which has over the years shown some innate disadvantages in the field of maintenance. It will be shown that this is mainly due to MTBF’s inherent acceptance of failure and the unscheduled maintenance therewith directly connected. Moreover, MFOP is successfully applied to a Petrochemicals specific Case study, as to date, no other application of the MFOP concept to the Petrochemicals sector is known.
An extensive literature study is presented, which covers concepts relevant to the overall study and which helps to contextualize the problem, revealing the major shortcomings of the commonly accepted MTBF metric. A methodology to analyze systems MFOP performance, making use of failure statistics to analyze both repairable and non-repairable systems, is presented. Validation makes use of a case study, which applies the MFOP methodology to a system, specifically in the Petrochemicals sector. It was shown that MFOP could be applied to the data obtained from the Petrochemicals sector, producing estimates, which were accurate representations of reality. These findings provide an exciting basis on which to begin to facilitate a paradigm shift in the mindset of maintenance personnel, setting reliability targets and dealing with unscheduled maintenance stops.

Keywords

Main Subjects


Abate, M., Lijesen, M., Pels, E., and Roelevelt, A. (2013). The impact of reliability on the productivity of railroad companies. Transportation Research Part E: Logistics and Transportation Review, Vol.51, pp.41-49.
Bohoris, G. A. (1996). Trend testing in reliability engineering. International Journal of Quality & Reliability Management, Vol.13 (2), pp.45-54.
Bourouni, K. (2013). Availability assessment of a reverse osmosis plant: Comparison between reliability block diagram and fault tree analysis methods. Desalination, Vol.313, pp.66-76.
Cox, T., Houdmont, J., and Griffiths, A. (2006). Rail passenger crowding, stress, health and safety in Britain. Transportation Research Part A: Policy and Practice, Vol.40 (3), pp.244-258.
Elsayed, E.A. (2012). Reliability engineering. New Jersey, Wiley Publishing.
Fritzsche, R., Gupta, J. N. D., andLasch, R. (2014). Optimal prognostic distance to minimize total maintenance cost: The case of the airline industry. International Journal of Production Economics, Vol. 151, pp.76-88.
Fazli-Khalaf, M., Khalilpourazari, S., and Mohammadi, M. (2017). Mixed robust possibilistic flexible chance constraint optimization model for emergency blood supply chain network design. Annals of Operations Research, pp.1-31.
Fritzsche, R. (2012). Cost adjustment for single item pooling models using a dynamic failure rate: A calculation for the aircraft industry. Transportation Research Part E: Logistics and Transportation Review, Vol.48 (6), pp.1065-1079.
Gulati, R. (2013). Maintenance and reliability best practices, New York, Industrial Press.
Huisman, D., Kroon, L. G., Lentink, R. M., and Vromans, M. J. (2005). Operations research in passenger railway transportation. Statistica Neerlandica, Vol.59 (4), pp.467-497.
Hashemian, H. M., and Bean, W. C. (2011). State-of-the-art predictive maintenance techniques. IEEE Transactions on Instrumentation and measurement, Vol.60 (10), pp.3480-3492.

Karanikas, N. (2013). Using reliability indicators to explore human factors issues in maintenance databases. International Journal of Quality & Reliability Management, Vol.30 (2), pp.116-128.
Khalilpourazari, S., and Pasandideh, S. H. R. (2018). Multi-objective optimization of multi-item EOQ model with partial backordering and defective batches and stochastic constraints using MOWCA and MOGWO. Operational Research, pp.1-33.
Khalilpourazari, S., Pasandideh, S. H. R., and Ghodratnama, (2018). A. Robust possibilistic programming for multi-item EOQ model with defective supply batches: Whale Optimization and Water Cycle Algorithms. Neural Computing and Applications, pp.1-28.
Kingham, S., Dickinson, J., and Copsey, S. (2001). Travelling to work: will people move out of their cars. Transport policy, Vol.8 (2), pp.151-160.
Milutinović, D., and Lučanin, V. (2005). Relation between reliability and availability of railway vehicles. FME Transactions, Vol. 33(3), pp.135-139.
Mohammadi, M., and Khalilpourazari, S. (2017, February). Minimizing makespan in a single machine scheduling problem with deteriorating jobs and learning effects. In Proceedings of the 6th International Conference on Software and Computer Applications (pp. 310-315). ACM.
Mann, H. B. (1945). Nonparametric tests against trend. Econometrica: Journal of the Econometric Society, Vol. 13(3), pp. 245-259.
Xu, M., and Wu, Y. (2015). Evolutionary Maintenance Based on Maintenance Free Operating Period Philosophy. Procedia Engineering, Vol.99, pp.587-592.
Waeyenbergh, G., and Pintelon, L. (2002). A framework for maintenance concept development. International journal of production economics, Vol.77 (3), pp.299-313.
Regattieri, A., Giazzi, A., Gamberi, M., and Gamberini, R. (2015). An innovative method to optimize the maintenance policies in an aircraft: General framework and case study. Journal of air transport management, Vol.44, pp.8-20.
Pintelon, L. M., and Gelders, L. F. (1992). Maintenance management decision making. European journal of operational research, Vol.58(3), pp.301-317.
Pham, H., and Wang, H. (1996). Imperfect maintenance. European journal of operational research, Vol.94 (3), pp.425-438.
Khalilpourazari, S., and Khalilpourazary, S. (2018). A Robust Stochastic Fractal Search approach for optimization of the surface grinding process. Swarm and Evolutionary Computation, Vol. 38, pp. 173-186.
Khalilpourazari, S., and Khalilpourazary, S. (2017). An efficient hybrid algorithm based on Water Cycle and Moth-Flame Optimization algorithms for solving numerical and constrained engineering optimization problems. Soft Computing, pp.1-24.
Saleh, J. H., and Marais, K. (2006). Highlights from the early (and pre-) history of reliability engineering. Reliability engineering & system safety, Vol. 91(2), pp.249-256.
Rietveld, P., Bruinsma, F. R., and Van Vuuren, D. J. (2001). Coping with unreliability in public transport chains: A case study for Netherlands. Transportation Research Part A: Policy and Practice, Vol.35 (6), pp.539-559.
Scarf, P. A. (2007). A framework for condition monitoring and condition based maintenance. Quality Technology & Quantitative Management, Vol.4 (2), pp.301-312.
Sherwin, D. (2000). A review of overall models for maintenance management. Journal of quality in maintenance engineering, Vol.6 (3), pp.138-164.
Slife, B. D., Williams, R. N., and Williams, R. N. (1995). What's behind the research?: Discovering hidden assumptions in the behavioral sciences. SAGE, pp.1-251.
Smith, A. and Hinchcliffe, G. (2004). RCM: Gateway to World Class Maintenance. Butterworth-Heinemann.
Smith, D. J. (2017). Reliability, maintainability and risk: practical methods for engineers. Butterworth-Heinemann.
Stanley, N. and Heap, H. (1979). Reliability-centered maintenance. Tech. Rep., AD-A066-579.
Suzuki, T. (1992). New directions for TPM. Productivity Press Cambridge, MA. Swanson, L. (2001). Linking maintenance strategies to performance. International Journal of Production Economics, Vol.70 (3), pp.237–244.
Todinov, M. T. (2003). Minimum failure-free operating intervals associated with random failures of non-repairable components. Computers & industrial engineering, Vol.45 (3), pp.475-491.
Trindade, D. and Nathan, S. (2005). “Failure rate” which one? Tech. Rep., Sun Microsystems Inc., Newark, CA.
Trindade, D. and Nathan, S. (2006). Statistical analysis of field data for repairable systems. In: Reliability and Maintainability Symposium (RANS). Orlando, Florida.
Tsang, A. H. (1998). A strategic approach to managing maintenance performance. Journal of Quality in Maintenance Engineering, Vol.4 (2), pp. 87-94.
Van der Lei, T., Herder, P., and Wijnia, Y. (2014). Asset Management: The State of the Art in Europe from a Life Cycle. Springer Verlag. Stellenbosch University http://scholar.sun.ac.za
Van der Westhuizen, J., and Van der Westhuizen, N. J. (2009). Optimisation of railway asset life cycle performance through a continuous asset improvement process as part of the maintenance management programme. SATC 2009.
Vanier, D. J. (2000, September). Advanced asset management: tools and techniques. In Innovations in Urban Infrastructure Seminar of the APWA International Public Works Congress, pp. 39-56.
Vanier, D. J. (2001). Asset management a to z. Innovations in Urban Infrastructure, pp.1-16.
Venkatesh, J. (2007). An introduction to total productive maintenance (tpm). The Plant Maintenance Resource Center.
Vlok, P. J. (2011). Introduction to practical statistical analysis of failure time data: Long term cost optimisation and residual life estimation. Self-Published, Course notes.
Vanderhaegen, F. (2001). A non-probabilistic prospective and retrospective human reliability analysis method—application to railway system. Reliability Engineering & System Safety, Vol.71 (1), pp.1-13.
Wang, P. and Coit, D.W. (2004). Repairable systems reliability trend tests and evaluation. Rutgers, State University of New Jersey.
Wenzler, I. (2005). Development of an asset management strategy for a network utility company: Lessons from a dynamic business simulation approach. Simulation & Gaming, Vol. 36(1), pp.75-90.
Wessels, W. R. (2011, January). Mechanical Engineering Design-for-Reliability. In ASME 2011 International Mechanical Engineering Congress and Exposition (pp. 469-477). American Society of Mechanical Engineers.
Wessels, W. (2012). Design-for-mechanical reliability to risk of failure. RMS Partnership: A Newsletter for Professionals.
Wheelhouse, P. (2009). Creating value from plant asset care. Plant and Maintenance Asset Care.
Willmott, P., and McCarthy, D. (2000). TPM-A Route to World Class Performance: A Route to World Class Performance. Elsevier.
Woodhouse, J. (2001). Combining the best bits of RCM, RBI, TPM, TQM, Six-Sigma and other ‘solutions’. J. Woodhouse.-The Woodhouse Partnership Ltd.-2003.
Woodhouse, J. (2003). Asset Management: concepts & practices. The Woodhouse Partnership Ltd.
Xie, M., and Lai, C. D. (1996). Reliability analysis using an additive Weibull model with bathtub-shaped failure rate function. Reliability Engineering & System Safety, Vol. 52(1), pp.87-93.
Ren, Z., and Wu, Y. (2015). Modeling the Performance of Aircraft Utilizing Maintenance Free Operating Periods. Procedia Engineering, Vol.99, pp.214-218.